Zircon Studsensor Pro LCD

Stud sensor Pro LCD quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings. Its easy-to-read display screen indicates stud edge, the patented SpotLite Pointing System shines a beam of light on the wall to identify the target, and Wire warning detection indicates the presence of live AC voltage.

Features:

• Stud Scan mode locates the edges of wood or metal studs up to 3/4 in. (19 mm) deep
• DeepScan mode doubles the scanning depth to 1 1/2 in. (38 mm)
• Easy-to-read LCD display indicates when a stud edge is approached
• Patented SpotLite Pointing System and audio tone signals when the stud edge is reached
• WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2 in. (51 mm) deep
• Zircon’s patented “over-the-stud” indication alerts user to start the scan in a new location if scanning begins over a stud

Specification:

• Brand: Zircon
• Product Type: Stud Sensor Pro LCD
• Colour: Yellow/Black
• Battery Type: Alkaline
• Battery Voltage: 9 V
• Operating Temperature: 20° to 105°F (-7° to 41°C)
• Storage Temperature: -20° to 150°F (-29° to 66°C)
• Humidity (Non-Condensing) : 5-90% RH
• Length: 15.4 cm
• Width: 6.8 cm
• Height: 2.8 cm
• Weight (without Battery): 0.09 kg
• Wire Warning (Position Accuracy): Typically 90-250 V at 50-60 Hz within 6 in. (152 mm) of a hot unshielded Accuracy wire in drywall
• Wire Warning (Depth): In typical wall with Romex wiring, wire can be detected up to 2 in. (51 mm) deep

Depth:

• StudScan Mode: Up to ¾ in. (19 mm)
• DeepScan Mode: Up to 1½ in. (38 mm)

Position Accuracy:

• Up to a depth of ¾ in. (19 mm): Typically within ¹⁄₈ in. (3 mm) using the dual scan and mark procedure
• Up to a depth of 1½ in. (38 mm): Typically within ³⁄₁₆ in. (5 mm) using the dual scan and mark procedure