ClimaSys CV Axial motor ventilator. 230V 50Hz or 60Hz. 68 W 50 Hz, 85 W 60 Hz. Free flow rate of 550 m3/h at 50 Hz and 60 Hz. 336 x 316 x 161 mm. Cut-out dimensions of 291 x 291 mm. Outlet grille injected thermoplastic (ASA PC), Grey RAL 7035. Connections terminals by cable. 2 protective grille on the front and rear surfaces. Protection IP54.
Main
- Range: ClimaSys
- Product Name: ClimaSys CV
- Product or Component Type: Fan
- Range Compatibility:
- Type of Filter: Standard
- Flow Rate:
- Free Flow Rate with Standard Filter:
- 562 m³/h at 50 Hz
- 586 m³/h at 60 Hz
- [Us] Rated Supply Voltage: 207...244 V
- Input Voltage: 230 V 50/60 Hz
Complementary
- Absorbed Power:
- 68 W at 50 Hz
- 85 W at 60 Hz
- [In] Rated Current:
- 0.52 A at 50 Hz
- 0.37 A at 60 Hz
- Noise level < at: 59 dB
- Bearing Type: Ball
- Dimensions:
- Height: External: 336 mm
- Width: External: 316 mm
- Depth: External: 161 mm
- Cut-out Dimensions: 291 x 291 mm
- Net Weight: 3.2 kg
- Material:
- Outlet Grille: Injected Thermoplastic (ASA PC)
- Colour:
- Outlet Grille: Grey (RAL 7035)
- Ambient Air Temperature:
- Operation: -15…60 °C
- Storage: -40…70 °C
- Maximum Pressure: 140 Pa at 0 m³/h flow rate
- Connections - Terminals: Terminal Block
- IP Degree of Protection: IP54
- Device Composition:
- 1 Axial Motor
- 2 Protective Grilles (on the Front and Rear Surfaces)
- 1 Filter (Front of Axial Motor)
- 1 Outlet Grille (Front)
- 1 Cut-out Template
- Condition of Use:
- Filter must be cleaned and replaced regularly
- Surrounding environment must be relatively clean
- Outside temperature must be 5 °C lower than inside temperature
- Overfrequent filter replacement should be avoided
- Flow rates depend on the work point; see ProClima software.