ClimaSys CV Axial motor ventilator. 230V 50Hz or 60Hz. 14.3 W 50 Hz, 16.3 W 60 Hz. Free flow rate with standard filter of 156 m3/h at 50 Hz and 193 m3/h at 60 Hz. 268 x 248 x 104 mm. Cut-out dimensions of 223 x 223 mm. Outlet grille injected thermoplastic (ASA PC), Grey RAL 7035. Connections terminals by faston connector. 2 protective grille on the front and rear surfaces. Protection IP54.
Main
- Range: ClimaSys
- Product Name: ClimaSys CV
- Product or Component Type: Fan
- Type of Filter: Standard
- Flow Rate:
- Free flow rate with standard filter: 165 m³/h at 50 Hz
- Free flow rate with standard filter: 193 m³/h at 60 Hz
- [Us] Rated Supply Voltage: 175...253 V
- Input Voltage: 230 V 50/60 Hz
Complementary
- Absorbed Power:
- 16.3 W at 50 Hz
- 14.3 W at 60 Hz
- [In] Rated Current:
- 0.12 A at 50 Hz
- 0.94 A at 60 Hz
- Noise Level: Less than 50…51 dB
- Bearing Type: Ball
- Dimensions:
- Height: External: 268 mm
- Width: External: 248 mm
- Depth: External: 104 mm
- Cut-out Dimensions: 223 x 223 mm
- Net Weight: 1.14 kg
- Material: Outlet Grille: Injected Thermoplastic (ASA PC)
- Colour: Outlet Grille: Grey (RAL 7035)
- Ambient Air Temperature:
- Operation: -20…60 °C
- Storage: -40…70 °C
- Maximum Pressure: 50 Pa at 0 m³/h flow rate
- Connections - Terminals: Faston Connector
- IP Degree of Protection: IP54
- Device Composition:
- 1 Axial Motor
- 2 Protective Grilles (on the Front and Rear Surfaces)
- 1 Filter (Front of Axial Motor)
- 1 Outlet Grille (Front)
- 1 Cut-out Template
- 1 Power Cord
- Condition of Use:
- Overfrequent filter replacement should be avoided
- Filter must be cleaned and replaced regularly
- Flow rates depend on the work point; see ProClima software
- Outside temperature must be 5 °C lower than inside temperature
- Surrounding environment must be relatively clean